China Hot selling K Series Right Angle Gear Motor Bevel Helical Gearbox bevel gearbox

Product Description

Product Description

K series Right Angle Gear Motor Bevel Helical Gearbox

(1) Input mode: coupled motor, belted motor, input shaft or connection flange.
(2) Right angle output.
(3) Compact structure.
(4) Rigid tooth face.
(5) Carrying greater torque, high loading capacity.
(6) High precision gear, ensuring the unit to operate stably, smooth transmission.
(7) Low noise, long lifespan.
(8) Large overlap coefficient, abrasion resistant.

Detailed Photos

Applications: 
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions. 

Advantages:
1. All input/ output shafts are plated so that can prevent them to rusting. 
2. The shaft mounts have labyrinth sealing on the conveyor end and input shaft end so that the oil seal is safe from contamination. 
3. High efficiency. 
Our gearbox units now are in higher load capacity as the gears have been redesigned. 
4. Strong capacity of being overloaded. 
Our gearbox units now are in higher load capacity as the gears have been redesigned. 
5. Long service life. 
Life of main parts of gearbox (except wearing parts) should not be less than 20, 000 hours. 
6. Anti-leaking oil. 
The front end of the shaft mount has a hub cover to protect the front oil seal as well as moving part of the gearbox. 
7. Simple structure and convenient to be installed and maintained 
8. Small volume 
9. Widely application 

K series gear units are available in the following designs:
KAZ..Y..Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel gear units with CHINAMFG shaft
KAT…Y…Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y…Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear units
KA…Y…Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel gear units
KF…Y…Flange-mounted helical-bevel gear units with CHINAMFG shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft input combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the special 1 ,the flange is required to be connected

Structure:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

Input power rating and maximum torque:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Gear unit weight:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

The weights are mean values, only for reference.
Maximum torque means the biggest 1 of the maximum torque related to the different ratio for the specified size.

Product Parameters

Rated Power 0.18KW~200KW
Rated Torque Up to 50000N.m
Gear Arrangement Bevel Helical Hardened Gearbox
Input Speed 50HZ or 60HZ of 4Pole,6Pole and 8pole
Ratio 5.36~192.18
Installation Form Flange Mounted, Foot Mounted or Torque Arm Mounted

Packaging & Shipping

Company Profile

Our Advantages

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery, Industry
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Customization:
Available

|

Customized Request

bevel gearbox

Handling High Torque and Speed Requirements in Bevel Gearboxes

Bevel gearboxes are versatile mechanical components capable of handling a wide range of torque and speed requirements, making them suitable for various industrial applications.

The ability of bevel gearboxes to handle high torque and speed requirements depends on several factors:

  • Gear Material: The choice of gear material greatly influences the torque and speed capacity of the bevel gearbox. High-strength materials like alloy steel or hardened steel are often used to withstand higher loads and speeds.
  • Design and Tooth Profile: The design of the bevel gears, including the tooth profile and size, plays a significant role in determining their load-bearing capacity and efficiency. Precisely engineered tooth profiles ensure smooth and efficient power transmission.
  • Lubrication and Cooling: Proper lubrication and cooling mechanisms are essential to manage heat generated during high-speed and high-torque operations. Adequate lubrication reduces friction and wear, enhancing the gearbox’s overall performance and longevity.
  • Bearing Selection: High-quality bearings that can handle both radial and axial loads are critical in supporting the rotational motion and absorbing forces generated by high torque and speed.
  • Alignment and Installation: Accurate alignment and installation of the bevel gearbox are vital to prevent misalignment-related issues that can lead to premature failure under high loads.

Bevel gearboxes are commonly used in applications where both high torque and speed are required, such as heavy machinery, vehicles, industrial equipment, and more. Proper engineering, material selection, and maintenance practices contribute to the ability of bevel gearboxes to efficiently handle the demands of various high-performance scenarios.

bevel gearbox

Challenges of Using Bevel Gearboxes

While bevel gearboxes offer various benefits, there are certain challenges that can arise when using them:

  • Lubrication: Proper lubrication is essential to reduce friction, wear, and heat generation in bevel gearboxes. However, ensuring effective lubrication in the meshing bevel gears can be challenging due to their complex geometry and the potential for oil pooling or inadequate coverage.
  • Noise and Vibration: Bevel gearboxes can produce noise and vibration during operation, especially at higher speeds. The interaction of the gear teeth can lead to noise generation, which may require additional measures such as sound insulation or vibration dampening to mitigate.
  • Alignment: Precise alignment of the bevel gears is crucial to ensure smooth and efficient power transmission. Misalignment can lead to increased wear, reduced efficiency, and even gear tooth failure. Achieving proper alignment can be more complex in bevel gearboxes compared to other gearbox types.
  • Maintenance: Bevel gearboxes may require more frequent maintenance compared to other gear systems. Regular inspections, lubrication checks, and gear tooth profile monitoring are necessary to detect and address any issues before they escalate.
  • Space Constraints: The design of bevel gearboxes can be bulky, especially when used in applications that require a high gear ratio. This can pose challenges in situations where space is limited.
  • Heat Dissipation: High-speed or heavy-duty applications can generate significant heat in bevel gearboxes. Adequate heat dissipation mechanisms, such as cooling fins or lubrication cooling, may be required to prevent overheating and premature failure.

Engineers and manufacturers need to carefully address these challenges to ensure the reliable and effective use of bevel gearboxes in various applications.

bevel gearbox

Bevel Gearbox: Function and Mechanics

A bevel gearbox is a type of mechanical device designed to transmit rotational motion and power between two intersecting shafts with non-parallel axes. It employs a set of bevel gears to change the direction of motion by 90 degrees. Bevel gearboxes are commonly used in various mechanical systems and applications where a change in rotational direction is required.

The function of a bevel gearbox can be summarized as follows:

  • Directional Change: A bevel gearbox is primarily utilized to redirect rotational motion from one input shaft to an output shaft that is oriented at a perpendicular angle. This enables the transmission of power and motion around corners or between different planes.
  • Torque Transfer: Bevel gearboxes are capable of transmitting torque between intersecting shafts, allowing for the efficient transfer of rotational force from the input shaft to the output shaft.
  • Speed Reduction or Increase: Depending on the arrangement of bevel gears, a bevel gearbox can also modify the rotational speed of the output shaft relative to the input shaft. This makes it possible to achieve speed reduction or speed increase as needed in the mechanical system.

The mechanics of a bevel gearbox involve the use of bevel gears, which have conically shaped teeth that allow them to mesh with each other at an angle. The most common types of bevel gears used in bevel gearboxes are straight bevel gears and spiral bevel gears.

When the input shaft rotates, its connected bevel gear engages with the first bevel gear in the gearbox. As a result, the rotational motion is transferred to the second bevel gear, which is mounted on the output shaft. The interaction of these gears changes the direction of rotation and transfers torque to the output shaft.

Bevel gearboxes are found in various applications, including automotive differentials, power tools, printing presses, machine tools, and other mechanical systems where torque transmission and directional changes are essential.

China Hot selling K Series Right Angle Gear Motor Bevel Helical Gearbox   bevel gearbox	China Hot selling K Series Right Angle Gear Motor Bevel Helical Gearbox   bevel gearbox
editor by CX 2024-04-10