Tag Archives: bevel gearbox

China wholesaler Durable and Highly Stable 2350 Spiral Bevel Main Gearbox for Square Hay Baler Adjustable Gearbox comer gearbox

Product Description

 

Product Description

 

GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice

CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009
Ductile iron QT450-10 according to standard GB/T 1348-2009
Cast steel ZG310-570 according to standard GB/T 5613-2014

SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.

POWER
To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical
sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working
conditions are different,please contact LongQuan technical department.

LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the
first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours.
The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition
of sludge.Check frequently the oil level and top up the oil whenever necessary.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Agricultural Machinery, Car
Function: Speed Reduction
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

bevel gearbox

Distinguishing Bevel Gearboxes from Other Gear Systems

Bevel gearboxes stand out from other types of gear systems due to their unique characteristics and applications:

  • Angle of Intersection: Bevel gearboxes are designed to transmit motion between intersecting shafts at specific angles, making them ideal for changing the direction of rotational motion.
  • Direction Change: Unlike parallel shaft gear systems, bevel gearboxes change the direction of motion by 90 degrees or other specified angles, allowing them to efficiently transmit power around corners.
  • Compact and Space-Saving: Bevel gearboxes are often compact and space-saving, making them suitable for applications with limited room for gear assembly.
  • Wide Range of Angles: Bevel gearboxes can handle various angle configurations beyond 90 degrees, providing flexibility in designing complex mechanical systems.
  • Specialized Applications: Bevel gearboxes are commonly used in applications requiring changes in direction, such as automotive differential systems, steering mechanisms, printing presses, and machinery with intersecting axes.

These distinguishing features make bevel gearboxes a versatile choice for scenarios where changing the direction of rotational motion or transmitting power between intersecting shafts is essential.

bevel gearbox

Efficient Power Transmission and Torque Transfer with Bevel Gearboxes

Bevel gearboxes are designed to ensure efficient power transmission and torque transfer in various mechanical systems. Here’s how they contribute to these aspects:

  • Multiple Gear Teeth Engagement: Bevel gearboxes typically have multiple gear teeth in contact simultaneously, distributing the load across a larger surface area. This feature enhances torque-carrying capacity and minimizes wear, resulting in efficient torque transfer.
  • High Gear Ratio: Bevel gearboxes can achieve high gear ratios, allowing them to convert high-speed, low-torque input into low-speed, high-torque output. This capability is valuable for applications requiring precise control over rotational speed and force.
  • Smooth Motion Transfer: The meshing of bevel gears ensures smooth and continuous motion transfer between intersecting shafts. This is essential for maintaining consistent power transmission and reducing vibration or noise.
  • Optimized Gear Tooth Design: Bevel gear teeth are carefully engineered with specific profiles and angles to minimize friction and maximize contact area. This design optimization enhances the efficiency of torque transfer while reducing energy losses due to friction.
  • Precise Machining and Alignment: Precision machining and proper alignment of bevel gears within the gearbox contribute to efficient power transmission. Accurate gear meshing reduces the likelihood of backlash and ensures minimal energy wastage.

Bevel gearboxes are chosen for applications where efficient power transmission, precise torque transfer, and reliable motion control are essential requirements.

bevel gearbox

Bevel Gearbox: Function and Mechanics

A bevel gearbox is a type of mechanical device designed to transmit rotational motion and power between two intersecting shafts with non-parallel axes. It employs a set of bevel gears to change the direction of motion by 90 degrees. Bevel gearboxes are commonly used in various mechanical systems and applications where a change in rotational direction is required.

The function of a bevel gearbox can be summarized as follows:

  • Directional Change: A bevel gearbox is primarily utilized to redirect rotational motion from one input shaft to an output shaft that is oriented at a perpendicular angle. This enables the transmission of power and motion around corners or between different planes.
  • Torque Transfer: Bevel gearboxes are capable of transmitting torque between intersecting shafts, allowing for the efficient transfer of rotational force from the input shaft to the output shaft.
  • Speed Reduction or Increase: Depending on the arrangement of bevel gears, a bevel gearbox can also modify the rotational speed of the output shaft relative to the input shaft. This makes it possible to achieve speed reduction or speed increase as needed in the mechanical system.

The mechanics of a bevel gearbox involve the use of bevel gears, which have conically shaped teeth that allow them to mesh with each other at an angle. The most common types of bevel gears used in bevel gearboxes are straight bevel gears and spiral bevel gears.

When the input shaft rotates, its connected bevel gear engages with the first bevel gear in the gearbox. As a result, the rotational motion is transferred to the second bevel gear, which is mounted on the output shaft. The interaction of these gears changes the direction of rotation and transfers torque to the output shaft.

Bevel gearboxes are found in various applications, including automotive differentials, power tools, printing presses, machine tools, and other mechanical systems where torque transmission and directional changes are essential.

China wholesaler Durable and Highly Stable 2350 Spiral Bevel Main Gearbox for Square Hay Baler Adjustable Gearbox   comer gearbox	China wholesaler Durable and Highly Stable 2350 Spiral Bevel Main Gearbox for Square Hay Baler Adjustable Gearbox   comer gearbox
editor by CX 2024-05-16

China Standard Jiangyin Gearbox Dby 160 Bevel and Cylindrical Gear Reducer with Good quality

Product Description

   HangZhou Gearbox DBY 160 bevel and cylindrical gear reducer

Company Profile 
    With over 30 years’ experience in the industry, HangZhou Gearbox Manufacturing Co., Ltd is a professional designer and producer of hard tooth surface gearboxes, which is also a director unit of China Heavy Machinery Industry Association.
     The company’s main products include cylinder gearbox series (ZDY, ZLY, ZSY), conical cylinder gear reducer series (DBY, DCY), standard modularized combined Gear motor series (JCH, JCB), JCP series planetary gear reducer, JCK series helical-bevel gear reducer, TY series coaxial hard tooth surface gear reducer and some dedicated gearboxes, which are widely applied in rubber and plastic, ports, metallurgy, mining, building materials, petrochemical, and other industries.
    The company constantly introduces domestic and foreign advanced production equipment and processing technology, with all types of large and medium-sized CNC hobbing machine, CNC profile grinding machine, CNC machining center, with expert system box-type multi-purpose CHINAMFG and pit- type carburizing furnace, gear testing center and other advanced processing and testing equipment.
    The company has established the mechanical research institution with professional and technical elite. Our continuous research and development is for supplying excellent first-class gear transmission equipment for our customers; Country-wide marketing and service network is to ensure perfect after-sales service.
 
Product Features
     DBY series bevel and cylindrical gear reducer whose major drive parts are made of high-quality alloy steel. The gear reaches the precision of grade 6 after it goes through carburizing, quenching and gear grinding. It featured by high carrying capacity force, , a long service life, small volume, high efficiency and low voice.

Technical Parameter:

Center Distance (mm) Ratio  Input Speed (rpm) Output Power (kW)
112 – 800 1.25 – 500 Max. 1500 Up to 6700

 

 
FAQ
 Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How long is your delivery time?
A: Generally it is within 10 days if the goods are in stock, for goods produced as per order, it is within 35 days after confirmation of order.
Q:How long should I wait for the feedback after I send the enquiry?
A: Normally Within 12 hours.
Q:What information should I give you to confirm the product?
A: Model/Size, Transmission Ratio, Speed, Shaft directions & Order quantity etc.
Q: How long is your product warranty?
A:We offer 12 months warranty from departure date of the goods.
Q: What is your payment terms?
 T/T 100% in advance for amount less than USD10000.-, 30% T/T in advance ,balance before shipment for amount above USD10000. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Bevel
Gear Shape: Cylindrical Gear
Step: Four-Step
Customization:
Available

|

Customized Request

bevel gearbox

Common Applications of Bevel Gearboxes in Various Industries

Bevel gearboxes find widespread use across diverse industries due to their unique capabilities and advantages:

  • Automotive: Bevel gearboxes are vital components in automotive differential systems, enabling smooth power distribution to the wheels and allowing for smooth turns and cornering.
  • Aerospace: These gearboxes are employed in aircraft landing gear systems, helicopter rotor systems, and other applications requiring changes in rotational direction.
  • Printing and Packaging: Bevel gearboxes are used in printing presses and packaging machinery to facilitate the transfer of motion between intersecting shafts.
  • Construction: Construction equipment often relies on bevel gearboxes for steering mechanisms, making it possible to control the direction of heavy machinery.
  • Industrial Machinery: Various industrial machines, such as woodworking equipment and conveyor systems, use bevel gearboxes for efficient power transmission around corners.
  • Marine: Bevel gearboxes are utilized in marine propulsion systems and steering mechanisms for boats and ships.
  • Energy and Power Generation: Wind turbines and hydroelectric generators benefit from bevel gearboxes to transmit motion between shafts at different angles.

The adaptability of bevel gearboxes to change motion direction while transmitting power efficiently makes them a go-to choice in industries where such capabilities are essential for optimal performance.

bevel gearbox

Proper Installation and Alignment of Bevel Gearboxes

Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:

  1. Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
  2. Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
  3. Alignment: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
  4. Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
  5. Lubrication: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
  6. Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
  7. Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.

It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.

bevel gearbox

Transmission of Motion at an Angle with Bevel Gearboxes

Bevel gearboxes are designed to transmit motion between intersecting shafts that are positioned at an angle to each other. They accomplish this by using a set of bevel gears, which have teeth that are cut in a conical shape.

When two bevel gears mesh, their teeth engage at the point of contact. As one gear rotates, it drives the other gear, transmitting motion and torque between the shafts. The angle between the shafts and the orientation of the gear teeth determine the direction and speed of motion transfer.

There are two main types of bevel gears commonly used in bevel gearboxes:

  • Straight Bevel Gears: These gears have straight-cut teeth and are used when the intersecting shafts are at a 90-degree angle. They are the simplest form of bevel gears and provide efficient motion transmission.
  • Spiral Bevel Gears: These gears have teeth that are cut at an angle, allowing them to gradually engage and disengage. Spiral bevel gears are used when the intersecting shafts are at angles other than 90 degrees. They provide smoother operation, less noise, and increased load-carrying capacity compared to straight bevel gears.

The precision manufacturing of bevel gear teeth ensures accurate and reliable motion transmission at various angles, making bevel gearboxes suitable for applications that require motion to be transferred between intersecting shafts in non-parallel orientations.

China Standard Jiangyin Gearbox Dby 160 Bevel and Cylindrical Gear Reducer   with Good quality China Standard Jiangyin Gearbox Dby 160 Bevel and Cylindrical Gear Reducer   with Good quality
editor by CX 2024-05-16

China manufacturer Industrial Bevel Gear Reducer Gearbox 90 Degree Electric Motor Gearbox gearbox design

Product Description

Industrial Bevel Gear Reducer Gearbox 90 degree electric motor gearbox

Product Description


Description: K Series Helical Bevel Gearbox

Overview
(1) Input mode: coupled motor, belted motor, input shaft or connection flange.
(2) Right angle output.
(3) Compact structure.
(4) Rigid tooth face.
(5) Carrying greater torque, high loading capacity.
(6) High precision gear, ensuring the unit to operate stably, smooth transmission.
(7) Low noise, long lifespan.
(8) Large overlap coefficient, abrasion resistant.

Detailed Photos

K series gear units are available in the following designs:
KAZ..Y..Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel gear units with CHINAMFG shaft
KAT…Y…Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y…Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear units
KA…Y…Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel gear units
KF…Y…Flange-mounted helical-bevel gear units with CHINAMFG shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft input combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the special 1 ,the flange is required to be connected

The weights are mean values, only for reference.
Maximum torque means the biggest 1 of the maximum torque related to the different ratio for the specified size.

Rated Power:0.18KW~200KW
Rated Torque:Up to 50000N.m
Gear Arrangement:Bevel Helical Hardened Gearbox
Input Speed:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.18

Product Parameters

Structure:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

Input power rating and maximum torque:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Gear unit weight:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

 

Packaging & Shipping

Company Profile

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, environmental protection, logistics and etc.
4.Do you offer any visiting?
Yes! We sincerely invite you to visit us! We can pick you from airport, railway station and so on. Also, we can arrange housing for you. Please let us know in advanced.
5.Is your quality good?
Quality never tell lies, we’re theprofessional manufacturer and exporter of gear reducer and motor in Asia, who has been given license since 1982. Also, we had achieved ISO9001 and CE Certificate among all manufacturers.

 

Contact:

If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Performance of Bevel Gearboxes in Heavy-Duty Applications like Construction Equipment

Bevel gearboxes are well-suited for heavy-duty applications such as construction equipment due to their robust design and reliable performance:

  • Durability: Bevel gearboxes are designed to withstand high loads, shocks, and impacts commonly encountered in construction environments.
  • Torque Transmission: Construction equipment requires high torque to move heavy loads, and bevel gearboxes efficiently transmit torque between intersecting shafts.
  • Directional Changes: Bevel gearboxes enable smooth and precise changes in rotational direction, crucial for controlling construction machinery.
  • Power Distribution: These gearboxes ensure efficient power distribution to various components of construction equipment, enhancing overall functionality.
  • Steering Mechanisms: Many construction vehicles rely on bevel gearboxes for their steering systems, allowing operators to navigate equipment with ease.
  • Reliability: In demanding construction conditions, bevel gearboxes offer reliable and consistent performance, minimizing downtime and maintenance needs.

The ability of bevel gearboxes to handle heavy loads, transmit torque, and facilitate directional changes makes them indispensable components in construction equipment, contributing to the efficiency and effectiveness of various construction operations.

bevel gearbox

Lubrication Requirements for Maintaining Bevel Gearbox Efficiency

Proper lubrication is crucial for maintaining the efficiency and longevity of bevel gearboxes. Here are the essential lubrication requirements:

  • Selection of Lubricant: Choose a high-quality lubricant specifically designed for bevel gear applications. The lubricant should have the appropriate viscosity and additives to withstand the operating conditions and loads.
  • Correct Lubricant Quantity: Follow the manufacturer’s recommendations for the correct lubricant quantity. Insufficient lubrication can lead to increased friction and wear, while over-lubrication can cause overheating and inefficient operation.
  • Lubrication Intervals: Establish a regular lubrication schedule based on the gearbox’s operating conditions. Factors such as load, speed, temperature, and environment can influence the frequency of lubrication.
  • Proper Lubrication Points: Identify all the necessary lubrication points on the bevel gearbox, including bearings, gears, and other moving parts. Ensure that lubricant is applied precisely to these points for optimal coverage.
  • Cleanliness: Keep the gearbox and its surrounding area clean to prevent contamination of the lubricant. Dirt, debris, and moisture can compromise the lubrication effectiveness and accelerate wear.
  • Temperature Considerations: Choose a lubricant with temperature stability suitable for the operating conditions. Extreme temperatures can affect lubricant viscosity and performance.
  • Monitoring: Regularly monitor the condition of the lubricant, including its color, consistency, and contamination level. Perform oil analysis if necessary to assess the lubricant’s health.
  • Lubricant Compatibility: Ensure that the chosen lubricant is compatible with the gearbox materials to prevent corrosion or damage.
  • Re-lubrication: During routine maintenance, clean and reapply lubricant as needed. Replace the lubricant when it reaches the end of its service life.

Adhering to proper lubrication requirements enhances the efficiency, performance, and reliability of bevel gearboxes, reducing friction, wear, and the risk of premature failure.

bevel gearbox

Primary Applications of Bevel Gearboxes in Different Industries

Bevel gearboxes find widespread use across various industries due to their ability to change the direction of rotational motion and transmit torque efficiently. Some of the primary applications of bevel gearboxes in different industries include:

  • Automotive Industry: Bevel gearboxes are commonly used in automotive differentials to distribute torque between the wheels and allow for smooth cornering. They also play a crucial role in transferring power between the engine and the wheels.
  • Industrial Manufacturing: Bevel gearboxes are utilized in machine tools, such as milling machines and lathes, to transmit power and motion between different components. They are also found in conveyor systems and material handling equipment.
  • Construction and Heavy Equipment: Bevel gearboxes are integrated into construction equipment like cranes, bulldozers, and excavators to change the direction of motion and transfer torque for various operations.
  • Marine Industry: Bevel gearboxes are used in marine applications, such as ship propulsion systems and steering mechanisms, to redirect power and motion efficiently.
  • Power Generation: Bevel gearboxes are employed in power plants to transmit rotational motion and torque between different components of generators and turbines.
  • Aerospace Industry: Bevel gearboxes are used in aerospace applications for functions like adjusting the pitch of aircraft propellers and controlling the movement of landing gear.
  • Mining and Quarrying: Bevel gearboxes are used in mining machinery to transfer power and torque to conveyor belts, crushers, and other equipment.
  • Agricultural Machinery: Bevel gearboxes are found in agricultural equipment like tractors and harvesters to drive different components and attachments.

The versatile nature of bevel gearboxes makes them suitable for a wide range of industries where efficient torque transmission and directional changes are essential for optimal operation.

China manufacturer Industrial Bevel Gear Reducer Gearbox 90 Degree Electric Motor Gearbox   gearbox design		China manufacturer Industrial Bevel Gear Reducer Gearbox 90 Degree Electric Motor Gearbox   gearbox design
editor by CX 2024-05-15

China Best Sales Spiral Helica Bevel Gearboxes gearbox engine

Product Description

Bevel helical gearbox with permanent magnet synchronous motor integrate variable frequency driver for conveyor

SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.

Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.

About Us

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motorcycle, Machinery, Marine, Agricultural Machinery, Ceramic
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Corner
Gear Shape: Helical Gear
Step: Single-Step
Samples:
US$ 569/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Advantages of Bevel Gearboxes in Specific Scenarios

Bevel gearboxes offer distinct advantages in certain scenarios, making them preferred over other gearbox types:

  • Angular Transmission: When rotational motion needs to be transmitted between intersecting shafts at different angles, bevel gearboxes excel due to their ability to change direction.
  • Compact Spaces: Bevel gearboxes are well-suited for applications with limited space, as they can fit into tight configurations without sacrificing performance.
  • High Torque at 90 Degrees: In situations requiring high torque transmission at a 90-degree angle, bevel gearboxes are more efficient than other types.
  • Steering Mechanisms: Bevel gearboxes are commonly used in steering systems of vehicles and machinery, providing smooth and accurate directional control.
  • Complex Motion Requirements: When machinery or equipment requires intricate motion patterns involving changes in direction and speed, bevel gearboxes offer the necessary versatility.
  • Heavy-Duty Applications: Bevel gearboxes excel in heavy-duty environments where robustness, torque transmission, and durability are crucial.

The specific design and capabilities of bevel gearboxes make them a preferred choice in these scenarios, contributing to optimal performance and efficiency in various industrial applications.

bevel gearbox

Lubrication Requirements for Maintaining Bevel Gearbox Efficiency

Proper lubrication is crucial for maintaining the efficiency and longevity of bevel gearboxes. Here are the essential lubrication requirements:

  • Selection of Lubricant: Choose a high-quality lubricant specifically designed for bevel gear applications. The lubricant should have the appropriate viscosity and additives to withstand the operating conditions and loads.
  • Correct Lubricant Quantity: Follow the manufacturer’s recommendations for the correct lubricant quantity. Insufficient lubrication can lead to increased friction and wear, while over-lubrication can cause overheating and inefficient operation.
  • Lubrication Intervals: Establish a regular lubrication schedule based on the gearbox’s operating conditions. Factors such as load, speed, temperature, and environment can influence the frequency of lubrication.
  • Proper Lubrication Points: Identify all the necessary lubrication points on the bevel gearbox, including bearings, gears, and other moving parts. Ensure that lubricant is applied precisely to these points for optimal coverage.
  • Cleanliness: Keep the gearbox and its surrounding area clean to prevent contamination of the lubricant. Dirt, debris, and moisture can compromise the lubrication effectiveness and accelerate wear.
  • Temperature Considerations: Choose a lubricant with temperature stability suitable for the operating conditions. Extreme temperatures can affect lubricant viscosity and performance.
  • Monitoring: Regularly monitor the condition of the lubricant, including its color, consistency, and contamination level. Perform oil analysis if necessary to assess the lubricant’s health.
  • Lubricant Compatibility: Ensure that the chosen lubricant is compatible with the gearbox materials to prevent corrosion or damage.
  • Re-lubrication: During routine maintenance, clean and reapply lubricant as needed. Replace the lubricant when it reaches the end of its service life.

Adhering to proper lubrication requirements enhances the efficiency, performance, and reliability of bevel gearboxes, reducing friction, wear, and the risk of premature failure.

bevel gearbox

Transmission of Motion at an Angle with Bevel Gearboxes

Bevel gearboxes are designed to transmit motion between intersecting shafts that are positioned at an angle to each other. They accomplish this by using a set of bevel gears, which have teeth that are cut in a conical shape.

When two bevel gears mesh, their teeth engage at the point of contact. As one gear rotates, it drives the other gear, transmitting motion and torque between the shafts. The angle between the shafts and the orientation of the gear teeth determine the direction and speed of motion transfer.

There are two main types of bevel gears commonly used in bevel gearboxes:

  • Straight Bevel Gears: These gears have straight-cut teeth and are used when the intersecting shafts are at a 90-degree angle. They are the simplest form of bevel gears and provide efficient motion transmission.
  • Spiral Bevel Gears: These gears have teeth that are cut at an angle, allowing them to gradually engage and disengage. Spiral bevel gears are used when the intersecting shafts are at angles other than 90 degrees. They provide smoother operation, less noise, and increased load-carrying capacity compared to straight bevel gears.

The precision manufacturing of bevel gear teeth ensures accurate and reliable motion transmission at various angles, making bevel gearboxes suitable for applications that require motion to be transferred between intersecting shafts in non-parallel orientations.

China Best Sales Spiral Helica Bevel Gearboxes   gearbox engineChina Best Sales Spiral Helica Bevel Gearboxes   gearbox engine
editor by CX 2024-05-15

China Professional Agricultural Gearbox Suppliers Pto Tractor Speed Increaser Helical Bevel Manufacturers High Quantity Kaf Miter Bevel Rotary Mower Cutter Tiller Brush Hog Mower comer gearbox

Product Description

           Agricultural Gearbox Suppliers Pto Tractor Speed Increaser Helical Bevel Manufacturers High Quantity Kaf Miter Bevel Rotary Mower Cutter Tiller Brush Hog Mower

Application of Agricultural Gearbox

Agricultural gearboxes are used in a variety of agricultural machines, including tractors, harvesters, and balers. They are used to transmit power from the engine to the machine’s working parts, such as the wheels, the cutting blades, and the baling press.

Agricultural gearboxes are designed to withstand the harsh conditions of agricultural use, such as dust, dirt, and moisture. They are also designed to be easy to maintain and repair.

Here are some of the applications of agricultural gearboxes:

  • Tractors: Agricultural gearboxes are used in tractors to transmit power from the engine to the wheels. This allows the tractor to move at a controlled speed and torque, which is necessary for tasks such as plowing, cultivating, and harvesting.
  • Harvester: Agricultural gearboxes are used in harvesters to transmit power from the engine to the cutting blades. This allows the harvester to cut crops at a controlled speed and torque, which is necessary for efficient harvesting.
  • Baler: Agricultural gearboxes are used in balers to transmit power from the engine to the baling press. This allows the baler to bale hay or straw at a controlled speed and torque, which is necessary for efficient baling.

Agricultural gearboxes are a vital part of many different agricultural machines. They help to improve the efficiency and productivity of agricultural operations.

Here are some of the advantages of using agricultural gearboxes:

  • Increased efficiency: Agricultural gearboxes can increase the efficiency of agricultural machines by allowing them to operate at a more controlled speed and torque. This can lead to a reduction in fuel consumption and an increase in productivity.
  • Reduced wear and tear: Agricultural gearboxes can help to reduce wear and tear on agricultural machines by distributing the load more evenly. This can lead to a longer lifespan for the machines and a reduction in maintenance costs.
  • Improved safety: Agricultural gearboxes can help to improve safety by preventing machines from stalling or overrunning. This can help to prevent accidents and injuries.

Overall, agricultural gearboxes are a valuable tool for farmers. They help to improve the efficiency, productivity, and safety of agricultural operations.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

bevel gearbox

Performance of Bevel Gearboxes in Heavy-Duty Applications like Construction Equipment

Bevel gearboxes are well-suited for heavy-duty applications such as construction equipment due to their robust design and reliable performance:

  • Durability: Bevel gearboxes are designed to withstand high loads, shocks, and impacts commonly encountered in construction environments.
  • Torque Transmission: Construction equipment requires high torque to move heavy loads, and bevel gearboxes efficiently transmit torque between intersecting shafts.
  • Directional Changes: Bevel gearboxes enable smooth and precise changes in rotational direction, crucial for controlling construction machinery.
  • Power Distribution: These gearboxes ensure efficient power distribution to various components of construction equipment, enhancing overall functionality.
  • Steering Mechanisms: Many construction vehicles rely on bevel gearboxes for their steering systems, allowing operators to navigate equipment with ease.
  • Reliability: In demanding construction conditions, bevel gearboxes offer reliable and consistent performance, minimizing downtime and maintenance needs.

The ability of bevel gearboxes to handle heavy loads, transmit torque, and facilitate directional changes makes them indispensable components in construction equipment, contributing to the efficiency and effectiveness of various construction operations.

bevel gearbox

Proper Installation and Alignment of Bevel Gearboxes

Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:

  1. Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
  2. Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
  3. Alignment: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
  4. Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
  5. Lubrication: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
  6. Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
  7. Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.

It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.

bevel gearbox

Primary Applications of Bevel Gearboxes in Different Industries

Bevel gearboxes find widespread use across various industries due to their ability to change the direction of rotational motion and transmit torque efficiently. Some of the primary applications of bevel gearboxes in different industries include:

  • Automotive Industry: Bevel gearboxes are commonly used in automotive differentials to distribute torque between the wheels and allow for smooth cornering. They also play a crucial role in transferring power between the engine and the wheels.
  • Industrial Manufacturing: Bevel gearboxes are utilized in machine tools, such as milling machines and lathes, to transmit power and motion between different components. They are also found in conveyor systems and material handling equipment.
  • Construction and Heavy Equipment: Bevel gearboxes are integrated into construction equipment like cranes, bulldozers, and excavators to change the direction of motion and transfer torque for various operations.
  • Marine Industry: Bevel gearboxes are used in marine applications, such as ship propulsion systems and steering mechanisms, to redirect power and motion efficiently.
  • Power Generation: Bevel gearboxes are employed in power plants to transmit rotational motion and torque between different components of generators and turbines.
  • Aerospace Industry: Bevel gearboxes are used in aerospace applications for functions like adjusting the pitch of aircraft propellers and controlling the movement of landing gear.
  • Mining and Quarrying: Bevel gearboxes are used in mining machinery to transfer power and torque to conveyor belts, crushers, and other equipment.
  • Agricultural Machinery: Bevel gearboxes are found in agricultural equipment like tractors and harvesters to drive different components and attachments.

The versatile nature of bevel gearboxes makes them suitable for a wide range of industries where efficient torque transmission and directional changes are essential for optimal operation.

China Professional Agricultural Gearbox Suppliers Pto Tractor Speed Increaser Helical Bevel Manufacturers High Quantity Kaf Miter Bevel Rotary Mower Cutter Tiller Brush Hog Mower   comer gearbox	China Professional Agricultural Gearbox Suppliers Pto Tractor Speed Increaser Helical Bevel Manufacturers High Quantity Kaf Miter Bevel Rotary Mower Cutter Tiller Brush Hog Mower   comer gearbox
editor by CX 2024-05-14

China manufacturer Helical Hypoid Spiral Bevel Gearbox with 0.75kw Motor cycloidal gearbox

Product Description

XGK Series HELICAL-HYPOID GEAR UNITS
 The hypoid gear has low friction, efficiency is as high as 92%,compared with the worm gearbox ,the efficiency improved about 10%-40%.The hypoid gear made of high quality alloy,treated by surface hardening,and produced by high-precision grinding machine, the output torque,gear strength and life are much better than worm gearbox.

Characteristics

1.Larger reduction ratio with hard surface hypoid bevel gear and helical gear drive
2.Big output torque, high transmission efficiency, energy-saving
3.Fine casting of aluminum alloy, light weight, rust-proof
4.Stable transmission, low noise, suitable for the terrible working condition
5.Good appearance and durability small volume
6.A variety of mounting positions, wide application, easy using
7.Mounting dimension is interchangeable with RV series worm gear reducer
8.Modularity on design:
Input: connected with IEC standard flange motor and servo motor with multiple specifications
Output:hollow shaft and CHINAMFG shaft
9.Multi-stages gear drive. It is divided into two-stage drive(one hypoid bevel gear and 1 helical gear) and three-stage drive(one hypoid bevel gear and 2 helical gears). Compared with RV series worm gear and worm shaft structure, it has more refined ratio and wider application

ABOUT CHINAMFG DRIVE 

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our products are widely used in ceramic industry, glass industry, woodworking machinery , high voltage switch, food & beverage, packaging & printing, Storage & logistics, hoisting & transportation facilities…etc , and CHINAMFG technically provide the professional product & service for the medium and high-end customers, and our gearboxes are best-selling in domestic, and even in abroad , such as in Europe, North America, South America, Middle East, South Asia, Southeast Asia, Africa…etc.

 In the future , CHINAMFG will hold the creed of “serving customer, diligence & simplicity, self-criticism, innovation, honesty, teamwork”, and the concept of “quality creates value” to focus on the customers’ requirements and provide them the competitive transmission solution and create value for them constantly, and make a high-end equipment manufacturing industry and create a preferred brand of replacing import products and upgrading continuously for the end users.

TEAM 

QUALITY CONTROL
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

PACKING 

DELIVERY 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Agricultural Machinery, Ceramic
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizotal Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Three-Step
Customization:
Available

|

Customized Request

bevel gearbox

Advantages of Bevel Gearboxes in Specific Scenarios

Bevel gearboxes offer distinct advantages in certain scenarios, making them preferred over other gearbox types:

  • Angular Transmission: When rotational motion needs to be transmitted between intersecting shafts at different angles, bevel gearboxes excel due to their ability to change direction.
  • Compact Spaces: Bevel gearboxes are well-suited for applications with limited space, as they can fit into tight configurations without sacrificing performance.
  • High Torque at 90 Degrees: In situations requiring high torque transmission at a 90-degree angle, bevel gearboxes are more efficient than other types.
  • Steering Mechanisms: Bevel gearboxes are commonly used in steering systems of vehicles and machinery, providing smooth and accurate directional control.
  • Complex Motion Requirements: When machinery or equipment requires intricate motion patterns involving changes in direction and speed, bevel gearboxes offer the necessary versatility.
  • Heavy-Duty Applications: Bevel gearboxes excel in heavy-duty environments where robustness, torque transmission, and durability are crucial.

The specific design and capabilities of bevel gearboxes make them a preferred choice in these scenarios, contributing to optimal performance and efficiency in various industrial applications.

bevel gearbox

Bevel Gearboxes in Marine and Aerospace Applications

Yes, bevel gearboxes are commonly found in both marine and aerospace applications, offering unique advantages in these industries:

  • Marine Applications: Bevel gearboxes are used in marine propulsion systems to transmit power from engines to propellers. Their ability to change rotational direction and transmit high torque makes them suitable for adjusting propeller pitch and optimizing thrust. Additionally, bevel gearboxes are employed in winch systems, steering mechanisms, and various onboard equipment.
  • Aerospace Applications: Bevel gearboxes play a crucial role in aerospace systems, such as helicopter rotor systems. They transmit power from the engine to the rotor blades while allowing changes in rotational direction. In aircraft, bevel gearboxes are used in landing gear mechanisms, flap control systems, and engine accessory drives. The compact design of bevel gearboxes is especially beneficial in aerospace applications where space and weight considerations are essential.

The versatility, efficiency, and reliability of bevel gearboxes make them well-suited for addressing the unique challenges and requirements of marine and aerospace environments.

bevel gearbox

Types of Bevel Gearboxes and Their Classification

Bevel gearboxes come in various types, each designed for specific applications and requirements. They are classified based on factors such as gear arrangement, shaft orientation, and usage. Some common types of bevel gearboxes include:

  • Straight Bevel Gearboxes: These gearboxes use straight bevel gears and are suitable for transmitting motion between intersecting shafts at a 90-degree angle.
  • Spiral Bevel Gearboxes: These gearboxes use spiral bevel gears and are employed when the intersecting shafts are at angles other than 90 degrees. They offer smoother operation and higher load capacity.
  • Skew Bevel Gearboxes: In skew bevel gearboxes, the axes of the input and output shafts are not parallel or intersecting. These gearboxes are used in applications where non-parallel and non-intersecting shafts need to be connected.
  • Angular Bevel Gearboxes: Angular bevel gearboxes are designed to connect shafts at a specific angle, often used in applications where the required shaft angle is different from standard bevel gear configurations.

The classification of bevel gearboxes is based on the arrangement and orientation of the gear teeth and shafts. Manufacturers offer a variety of designs to accommodate different industrial needs and ensure efficient motion transmission at various angles.

China manufacturer Helical Hypoid Spiral Bevel Gearbox with 0.75kw Motor   cycloidal gearbox	China manufacturer Helical Hypoid Spiral Bevel Gearbox with 0.75kw Motor   cycloidal gearbox
editor by CX 2024-05-13

China factory K Series Right Angle 90 Degree Spiral Bevel Gear Box for Conveyo gearbox definition

Product Description

K Series Right Angle 90 Degree Spiral Bevel Gear box for Conveyo

Product Description


Description: K Series Helical Bevel Gearbox

Overview
(1) Input mode: coupled motor, belted motor, input shaft or connection flange.
(2) Right angle output.
(3) Compact structure.
(4) Rigid tooth face.
(5) Carrying greater torque, high loading capacity.
(6) High precision gear, ensuring the unit to operate stably, smooth transmission.
(7) Low noise, long lifespan.
(8) Large overlap coefficient, abrasion resistant.

Detailed Photos

K series gear units are available in the following designs:
KAZ..Y..Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel gear units with CHINAMFG shaft
KAT…Y…Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y…Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear units
KA…Y…Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel gear units
KF…Y…Flange-mounted helical-bevel gear units with CHINAMFG shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft input combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the special 1 ,the flange is required to be connected

The weights are mean values, only for reference.
Maximum torque means the biggest 1 of the maximum torque related to the different ratio for the specified size.

Rated Power:0.18KW~200KW
Rated Torque:Up to 50000N.m
Gear Arrangement:Bevel Helical Hardened Gearbox
Input Speed:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.18

Product Parameters

Structure:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

Input power rating and maximum torque:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Gear unit weight:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

 

Packaging & Shipping

Company Profile

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, environmental protection, logistics and etc.
4.Do you offer any visiting?
Yes! We sincerely invite you to visit us! We can pick you from airport, railway station and so on. Also, we can arrange housing for you. Please let us know in advanced.
5.Is your quality good?
Quality never tell lies, we’re theprofessional manufacturer and exporter of gear reducer and motor in Asia, who has been given license since 1982. Also, we had achieved ISO9001 and CE Certificate among all manufacturers.

 

Contact:

If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Minimizing Backlash and Ensuring Efficient Power Transfer in Bevel Gearboxes

Bevel gearboxes are meticulously designed to minimize backlash and optimize power transfer efficiency, ensuring smooth and precise motion in mechanical systems.

Several design considerations contribute to minimizing backlash and enhancing power transfer:

  • Tooth Profile and Quality: High-precision tooth profiles with minimal clearance between mating gears reduce backlash. The use of advanced manufacturing techniques ensures consistent gear quality and accurate tooth engagement.
  • Preload and Contact Pattern: Properly applied preload and optimized contact patterns between the bevel gear teeth enhance meshing accuracy, reducing the potential for backlash and improving load distribution.
  • Gearbox Rigidity: Stiff and rigid gearbox housing and components help maintain precise gear alignment, reducing the effects of deflection and misalignment that can lead to backlash.
  • Bearing Selection: High-quality bearings with minimal play contribute to reduced backlash and smoother motion by minimizing axial and radial movement of the gears.
  • Lubrication: Adequate lubrication reduces friction, wear, and vibration, promoting efficient power transfer and minimizing backlash-related issues.
  • Tolerances and Manufacturing Precision: Tight manufacturing tolerances and precision machining processes ensure consistent gear geometry, alignment, and positioning, minimizing any potential sources of backlash.

By incorporating these design principles and practices, bevel gearboxes are engineered to achieve tight backlash control and efficient power transmission. This makes them suitable for applications where precise motion control, accuracy, and reliability are crucial, such as robotics, aerospace, automotive, and industrial machinery.

bevel gearbox

Bevel Gearboxes in Marine and Aerospace Applications

Yes, bevel gearboxes are commonly found in both marine and aerospace applications, offering unique advantages in these industries:

  • Marine Applications: Bevel gearboxes are used in marine propulsion systems to transmit power from engines to propellers. Their ability to change rotational direction and transmit high torque makes them suitable for adjusting propeller pitch and optimizing thrust. Additionally, bevel gearboxes are employed in winch systems, steering mechanisms, and various onboard equipment.
  • Aerospace Applications: Bevel gearboxes play a crucial role in aerospace systems, such as helicopter rotor systems. They transmit power from the engine to the rotor blades while allowing changes in rotational direction. In aircraft, bevel gearboxes are used in landing gear mechanisms, flap control systems, and engine accessory drives. The compact design of bevel gearboxes is especially beneficial in aerospace applications where space and weight considerations are essential.

The versatility, efficiency, and reliability of bevel gearboxes make them well-suited for addressing the unique challenges and requirements of marine and aerospace environments.

bevel gearbox

Significance of the Angle Between Bevel Gears in a Bevel Gearbox

The angle between bevel gears in a bevel gearbox plays a crucial role in determining how the rotational motion is transmitted between the intersecting shafts. This angle, often referred to as the “shaft angle” or “pitch angle,” has significant implications for the performance, efficiency, and load-bearing capacity of the gearbox.

The angle between bevel gears affects several key aspects:

  • Mechanical Advantage: The angle determines the mechanical advantage or gear ratio of the bevel gearbox. A smaller angle results in a lower gear ratio, providing higher torque and slower rotational speed, while a larger angle yields a higher gear ratio, resulting in higher rotational speed and lower torque output.
  • Efficiency: The angle affects the efficiency of power transmission. A smaller angle generally leads to higher efficiency due to improved load distribution and reduced friction losses.
  • Load Distribution: Properly chosen angles contribute to even load distribution across the teeth of the bevel gears. Improper angles can cause uneven wear and premature failure.
  • Space Constraints: The angle impacts the overall dimensions of the bevel gearbox, which can be critical when space is limited in certain applications.

The angle between bevel gears is typically selected based on the specific requirements of the mechanical system and the intended application. It is a critical design consideration that engineers carefully analyze to ensure optimal performance and reliability of the bevel gearbox.

China factory K Series Right Angle 90 Degree Spiral Bevel Gear Box for Conveyo   gearbox definition		China factory K Series Right Angle 90 Degree Spiral Bevel Gear Box for Conveyo   gearbox definition
editor by CX 2024-05-09

China manufacturer Snkg400 Bevel Helical Gearbox with Permanent Magnet Synchronous Motor Integrate Variable Frequency Drive car gearbox

Product Description

SNKGA200A-MD100C Bevel helical gearbox with Permanent magnet synchronous motor integrate variable frequency driver for conveyor

SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.

Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.

About Us

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Helical Bevel
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Three-Step
Samples:
US$ 569/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gearbox

Minimizing Backlash and Ensuring Efficient Power Transfer in Bevel Gearboxes

Bevel gearboxes are meticulously designed to minimize backlash and optimize power transfer efficiency, ensuring smooth and precise motion in mechanical systems.

Several design considerations contribute to minimizing backlash and enhancing power transfer:

  • Tooth Profile and Quality: High-precision tooth profiles with minimal clearance between mating gears reduce backlash. The use of advanced manufacturing techniques ensures consistent gear quality and accurate tooth engagement.
  • Preload and Contact Pattern: Properly applied preload and optimized contact patterns between the bevel gear teeth enhance meshing accuracy, reducing the potential for backlash and improving load distribution.
  • Gearbox Rigidity: Stiff and rigid gearbox housing and components help maintain precise gear alignment, reducing the effects of deflection and misalignment that can lead to backlash.
  • Bearing Selection: High-quality bearings with minimal play contribute to reduced backlash and smoother motion by minimizing axial and radial movement of the gears.
  • Lubrication: Adequate lubrication reduces friction, wear, and vibration, promoting efficient power transfer and minimizing backlash-related issues.
  • Tolerances and Manufacturing Precision: Tight manufacturing tolerances and precision machining processes ensure consistent gear geometry, alignment, and positioning, minimizing any potential sources of backlash.

By incorporating these design principles and practices, bevel gearboxes are engineered to achieve tight backlash control and efficient power transmission. This makes them suitable for applications where precise motion control, accuracy, and reliability are crucial, such as robotics, aerospace, automotive, and industrial machinery.

bevel gearbox

Proper Installation and Alignment of Bevel Gearboxes

Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:

  1. Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
  2. Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
  3. Alignment: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
  4. Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
  5. Lubrication: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
  6. Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
  7. Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.

It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.

bevel gearbox

Bevel Gearbox: Function and Mechanics

A bevel gearbox is a type of mechanical device designed to transmit rotational motion and power between two intersecting shafts with non-parallel axes. It employs a set of bevel gears to change the direction of motion by 90 degrees. Bevel gearboxes are commonly used in various mechanical systems and applications where a change in rotational direction is required.

The function of a bevel gearbox can be summarized as follows:

  • Directional Change: A bevel gearbox is primarily utilized to redirect rotational motion from one input shaft to an output shaft that is oriented at a perpendicular angle. This enables the transmission of power and motion around corners or between different planes.
  • Torque Transfer: Bevel gearboxes are capable of transmitting torque between intersecting shafts, allowing for the efficient transfer of rotational force from the input shaft to the output shaft.
  • Speed Reduction or Increase: Depending on the arrangement of bevel gears, a bevel gearbox can also modify the rotational speed of the output shaft relative to the input shaft. This makes it possible to achieve speed reduction or speed increase as needed in the mechanical system.

The mechanics of a bevel gearbox involve the use of bevel gears, which have conically shaped teeth that allow them to mesh with each other at an angle. The most common types of bevel gears used in bevel gearboxes are straight bevel gears and spiral bevel gears.

When the input shaft rotates, its connected bevel gear engages with the first bevel gear in the gearbox. As a result, the rotational motion is transferred to the second bevel gear, which is mounted on the output shaft. The interaction of these gears changes the direction of rotation and transfers torque to the output shaft.

Bevel gearboxes are found in various applications, including automotive differentials, power tools, printing presses, machine tools, and other mechanical systems where torque transmission and directional changes are essential.

China manufacturer Snkg400 Bevel Helical Gearbox with Permanent Magnet Synchronous Motor Integrate Variable Frequency Drive   car gearbox	China manufacturer Snkg400 Bevel Helical Gearbox with Permanent Magnet Synchronous Motor Integrate Variable Frequency Drive   car gearbox
editor by CX 2024-05-09

China OEM China Best Supplier H Series Parallel Shaft Bevel Helical Industrial Gearbox gearbox definition

Product Description

China best supplier H series parallel shaft bevel helical industrial gearbox

Product Description


1. Model Number

Types: H1,H2,H3,H4 Parallel Shaft Gearbox
Sizes: 1,2,3,4,5,24,25,26

2. Product Characteristics
(1)Large torque range, capable of horizontal mounting and vertical mounting.
(2)High-efficiency and long life-span, high permissible axial and radial loads.
(3)Low noise, high reliability and compact structure and so on.
(4)Output shafts type: CHINAMFG shaft, hollow shaft and hollow shaft with shrink disk.
(5)Low noise, high reliability and compact structure.

DimensionsCustomization according to the application.

Rated Power:4KW~3015KW
Rated Torque:0.79N.m~9N.m

Ratio
 
I=1/1.25~1/450
Gear Arrangement
 
Helical Hardened Gearbox
Rated Torque
 
0.79n.M~900kn.M
Rated Power
 
4kw~3015kw
Input Speed
 
1500r/Min,1000r/Min,750r/Min

Packaging & Shipping

Company Profile

Our Advantages

FAQ

1.Q:What kinds of gearbox can you produce for us?

A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
If you have any demand for our products please feel free to contact me.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Helical
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step
Customization:
Available

|

Customized Request

bevel gearbox

Minimizing Backlash and Ensuring Efficient Power Transfer in Bevel Gearboxes

Bevel gearboxes are meticulously designed to minimize backlash and optimize power transfer efficiency, ensuring smooth and precise motion in mechanical systems.

Several design considerations contribute to minimizing backlash and enhancing power transfer:

  • Tooth Profile and Quality: High-precision tooth profiles with minimal clearance between mating gears reduce backlash. The use of advanced manufacturing techniques ensures consistent gear quality and accurate tooth engagement.
  • Preload and Contact Pattern: Properly applied preload and optimized contact patterns between the bevel gear teeth enhance meshing accuracy, reducing the potential for backlash and improving load distribution.
  • Gearbox Rigidity: Stiff and rigid gearbox housing and components help maintain precise gear alignment, reducing the effects of deflection and misalignment that can lead to backlash.
  • Bearing Selection: High-quality bearings with minimal play contribute to reduced backlash and smoother motion by minimizing axial and radial movement of the gears.
  • Lubrication: Adequate lubrication reduces friction, wear, and vibration, promoting efficient power transfer and minimizing backlash-related issues.
  • Tolerances and Manufacturing Precision: Tight manufacturing tolerances and precision machining processes ensure consistent gear geometry, alignment, and positioning, minimizing any potential sources of backlash.

By incorporating these design principles and practices, bevel gearboxes are engineered to achieve tight backlash control and efficient power transmission. This makes them suitable for applications where precise motion control, accuracy, and reliability are crucial, such as robotics, aerospace, automotive, and industrial machinery.

bevel gearbox

Proper Installation and Alignment of Bevel Gearboxes

Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:

  1. Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
  2. Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
  3. Alignment: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
  4. Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
  5. Lubrication: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
  6. Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
  7. Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.

It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.

bevel gearbox

Bevel Gearbox: Function and Mechanics

A bevel gearbox is a type of mechanical device designed to transmit rotational motion and power between two intersecting shafts with non-parallel axes. It employs a set of bevel gears to change the direction of motion by 90 degrees. Bevel gearboxes are commonly used in various mechanical systems and applications where a change in rotational direction is required.

The function of a bevel gearbox can be summarized as follows:

  • Directional Change: A bevel gearbox is primarily utilized to redirect rotational motion from one input shaft to an output shaft that is oriented at a perpendicular angle. This enables the transmission of power and motion around corners or between different planes.
  • Torque Transfer: Bevel gearboxes are capable of transmitting torque between intersecting shafts, allowing for the efficient transfer of rotational force from the input shaft to the output shaft.
  • Speed Reduction or Increase: Depending on the arrangement of bevel gears, a bevel gearbox can also modify the rotational speed of the output shaft relative to the input shaft. This makes it possible to achieve speed reduction or speed increase as needed in the mechanical system.

The mechanics of a bevel gearbox involve the use of bevel gears, which have conically shaped teeth that allow them to mesh with each other at an angle. The most common types of bevel gears used in bevel gearboxes are straight bevel gears and spiral bevel gears.

When the input shaft rotates, its connected bevel gear engages with the first bevel gear in the gearbox. As a result, the rotational motion is transferred to the second bevel gear, which is mounted on the output shaft. The interaction of these gears changes the direction of rotation and transfers torque to the output shaft.

Bevel gearboxes are found in various applications, including automotive differentials, power tools, printing presses, machine tools, and other mechanical systems where torque transmission and directional changes are essential.

China OEM China Best Supplier H Series Parallel Shaft Bevel Helical Industrial Gearbox   gearbox definition		China OEM China Best Supplier H Series Parallel Shaft Bevel Helical Industrial Gearbox   gearbox definition
editor by CX 2024-05-08

China wholesaler 1400rpm, 1450 Rpm Input K Series Helical Bevel Electric Motor Reduction Gearbox gearbox adjustment

Product Description

K series helical bevel speed gearbox reducer

Product name

Model K 107 series helical bevel gearbox motor reducer with oil seal overload parallel transmission 90 degree China factory

Warranty

1 year

Applicable Industries

Hotels, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Home Use, Retail,
Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company

Weight (KG)

50KG

Customized support

OEM, ODM, OBM

Gearing Arrangement

Helical

Output Torque

3.5-56845N.m

Input Speed

0-3000rpm/min

Output Speed

0.1-356rpm/min

Place of Origin

China

Product name

K Series Parallel Shaft Helical Gear Reducer

Output Torque

10-62800N.m

Output Speed

750-3000rpm/min

Input Speed

0-3000rpm/min

Input power

0.12-250kw

Mounting Position

Foot Mounted. Flange Mounted

Ratio

3.77~281.71

Gearing Arrangement

Helical

Reduction ratio

68

Hardness of Tooth Surface

Tooth surface hardness

Detailed Photos

 

Product Description

-K Series Helical Bevel Gearbox
 

 

 

K series product performance

High transmission efficiency, low energy consumption and superior performance. High rigidity cast iron box with ribs; hard-toothed gears are made of high-quality alloy steel, the surface is carburized and quenched and hardened, and the teeth are finely machined, with stable transmission, low noise, large bearing capacity, low temperature rise and long service life.

High hardness high grinding accuracy

The gears are made of high-quality alloy carburizing and quenching, the tooth surface hardness is as high as 60±2hrc, and the tooth surface grinding accuracy is as high as 5-6 grades.

 

 

 

 

Elaborate design

From the box to the internal gear, it adopts a complete modular structure design, which is suitable for largescale production and
flexible selection.

Save power

The standard reducer model is divided according to the form of decreasing torque. Compared with the traditional equal proportion division, it is more in line with customer requirements and avoids power waste.


 

Certifications

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

bevel gearbox

Performance of Bevel Gearboxes in Heavy-Duty Applications like Construction Equipment

Bevel gearboxes are well-suited for heavy-duty applications such as construction equipment due to their robust design and reliable performance:

  • Durability: Bevel gearboxes are designed to withstand high loads, shocks, and impacts commonly encountered in construction environments.
  • Torque Transmission: Construction equipment requires high torque to move heavy loads, and bevel gearboxes efficiently transmit torque between intersecting shafts.
  • Directional Changes: Bevel gearboxes enable smooth and precise changes in rotational direction, crucial for controlling construction machinery.
  • Power Distribution: These gearboxes ensure efficient power distribution to various components of construction equipment, enhancing overall functionality.
  • Steering Mechanisms: Many construction vehicles rely on bevel gearboxes for their steering systems, allowing operators to navigate equipment with ease.
  • Reliability: In demanding construction conditions, bevel gearboxes offer reliable and consistent performance, minimizing downtime and maintenance needs.

The ability of bevel gearboxes to handle heavy loads, transmit torque, and facilitate directional changes makes them indispensable components in construction equipment, contributing to the efficiency and effectiveness of various construction operations.

bevel gearbox

Maintenance Procedures to Extend the Lifespan of Bevel Gearboxes

Proper maintenance is essential for extending the lifespan of bevel gearboxes. Here are specific procedures to ensure their longevity:

  • Regular Inspection: Conduct routine visual inspections to identify signs of wear, damage, or misalignment. Check for unusual noise, vibration, or leaks.
  • Lubrication: Follow the recommended lubrication schedule and guidelines for the specific gearbox. Ensure the correct type and quantity of lubricant are used.
  • Cleanliness: Keep the gearbox and its surrounding area clean to prevent dirt, debris, and contaminants from entering and causing damage.
  • Tightening and Fasteners: Periodically check and tighten fasteners, bolts, and mounting components. Loose fasteners can lead to misalignment and excessive wear.
  • Alignment: Ensure proper alignment of the gearbox with connected components. Misalignment can cause increased friction, heat, and wear.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox to identify any overheating issues. Excessive heat can degrade lubricant and components.
  • Seals and Gaskets: Inspect and replace seals and gaskets as needed to prevent leaks and contamination.
  • Gear Tooth Inspection: Periodically check gear teeth for signs of pitting, chipping, or wear. Address any issues promptly to prevent further damage.
  • Vibration Analysis: Implement vibration analysis to detect irregularities in the gearbox’s operation. Unusual vibrations may indicate misalignment or other mechanical issues.
  • Replace Worn Parts: Replace worn or damaged components, such as bearings, gears, and seals, with genuine parts from the manufacturer.
  • Professional Maintenance: Engage qualified technicians for more in-depth inspections and maintenance tasks, especially for complex gearboxes.
  • Operating Conditions: Operate the gearbox within its specified load, speed, and temperature limits to prevent excessive stress and wear.
  • Training: Ensure personnel are trained to operate, maintain, and troubleshoot the gearbox properly.
  • Record Keeping: Maintain detailed records of maintenance activities, inspections, and repairs for reference and future planning.

By following these maintenance procedures, bevel gearboxes can maintain optimal performance, minimize downtime, and have an extended operational lifespan.

bevel gearbox

Significance of the Angle Between Bevel Gears in a Bevel Gearbox

The angle between bevel gears in a bevel gearbox plays a crucial role in determining how the rotational motion is transmitted between the intersecting shafts. This angle, often referred to as the “shaft angle” or “pitch angle,” has significant implications for the performance, efficiency, and load-bearing capacity of the gearbox.

The angle between bevel gears affects several key aspects:

  • Mechanical Advantage: The angle determines the mechanical advantage or gear ratio of the bevel gearbox. A smaller angle results in a lower gear ratio, providing higher torque and slower rotational speed, while a larger angle yields a higher gear ratio, resulting in higher rotational speed and lower torque output.
  • Efficiency: The angle affects the efficiency of power transmission. A smaller angle generally leads to higher efficiency due to improved load distribution and reduced friction losses.
  • Load Distribution: Properly chosen angles contribute to even load distribution across the teeth of the bevel gears. Improper angles can cause uneven wear and premature failure.
  • Space Constraints: The angle impacts the overall dimensions of the bevel gearbox, which can be critical when space is limited in certain applications.

The angle between bevel gears is typically selected based on the specific requirements of the mechanical system and the intended application. It is a critical design consideration that engineers carefully analyze to ensure optimal performance and reliability of the bevel gearbox.

China wholesaler 1400rpm, 1450 Rpm Input K Series Helical Bevel Electric Motor Reduction Gearbox   gearbox adjustment	China wholesaler 1400rpm, 1450 Rpm Input K Series Helical Bevel Electric Motor Reduction Gearbox   gearbox adjustment
editor by CX 2024-05-08