Merchandise Description
Merchandise Description:
one.Flexspline is a hollow flanging normal cylinder composition.
2.There is a massive-diameter hollow shaft gap in the middle of the cam of the wave generator. The internal style of the reducer has a assist bearing.
3.It has a entirely sealed construction and is straightforward to install. It is quite suitable for the occasions exactly where the wire wants to be threaded from the heart of the reducer.
Benefits:
The first:Large precision,high torque
The second:committed specialized personnel can be on-the-go to offer design and style answers
The 3rd:Factory direct income good workmanship tough good quality assurance
The fourth:Product high quality issues have a one particular-12 months warranty time, can be returned for alternative or repair
Organization profile:
HangZhou CZPT Technological innovation Co., Ltd. recognized in 2014, is fully commited to the R & D plant of higher-precision transmission factors. At current, the once-a-year creation potential can achieve 45000 sets of harmonic reducers. We firmly feel in quality initial. All back links from uncooked supplies to completed items are strictly supervised and controlled, which offers a CZPT basis for merchandise quality. Our merchandise are offered all above the nation and abroad.
The harmonic reducer and other large-precision transmission components have been independently designed by the firm. Our organization spends twenty% of its sales every year on the research and advancement of new systems in the market. There are 5 individuals in R & D.
Our gain is as below:
one.7 several years of advertising knowledge
two. 5-person R & D group to give you with complex assistance
three. It is offered at property and abroad and exported to Turkey and Ireland
four. The item quality is certain with a one particular-yr guarantee
5. Merchandise can be tailored
Toughness manufacturing unit:
Our plant has an whole campus The quantity of workshops is close to 300 Whether it really is from the generation of uncooked components and the procurement of uncooked materials to the inspection of concluded items, we’re carrying out it ourselves. There is a complete manufacturing program
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start off end | The allowable optimum of the typical load torque | Maximum torque is permitted in an quick | Permit the greatest pace to be entered | Regular enter pace is allowed | Back again hole | design existence | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | six.2 | .6 | twenty.seven | 2.1 | 7.9 | .seven | 40.3 | four.one | 7000 | 3000 | ≤30 | 10000 |
80 | nine | .9 | 27 | two.7 | twelve.7 | 1.3 | 54.one | 5.5 | |||||
one hundred | nine | .9 | 32 | three.three | 12.7 | 1.three | 62.one | 6.three | |||||
17 | 50 | eighteen.4 | one.9 | 39 | four | 29.nine | three | 80.5 | eight.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | two.six | forty nine.5 | five | 31 | 3.2 | one hundred.1 | 10.two | |||||
a hundred | 27.6 | 2.8 | 62 | six.3 | forty five | four.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | two.9 | sixty four.4 | 6.6 | 39 | 4 | 112.seven | eleven.five | 5600 | 3000 | ≤30 | 15000 |
80 | 39.one | four | eighty five | 8.8 | fifty four | five.five | 146.one | fourteen.nine | |||||
a hundred | 46 | four.seven | 94.3 | 9.6 | fifty six | 5.eight | 169.one | seventeen.2 | |||||
one hundred twenty | 46 | four.seven | 100 | ten.two | 56 | five.eight | 169.one | seventeen.2 | |||||
a hundred and sixty | 46 | 4.7 | 100 | ten.two | fifty six | 5.8 | 169.one | 17.2 | |||||
25 | fifty | forty four.nine | 4.six | 113 | eleven.5 | sixty three | six.5 | 213.nine | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | seventy two.5 | seven.4 | 158 | 16.1 | a hundred | ten.2 | 293.three | 29.nine | |||||
one hundred | seventy seven.one | 7.nine | 181 | eighteen.4 | 124 | 12.seven | 326.6 | 33.three | |||||
one hundred twenty | 77.one | seven.9 | 192 | 19.6 | 124 | 12.7 | 349.six | 35.6 | |||||
32 | fifty | 87.4 | 8.nine | 248 | 25.3 | 124 | 12.seven | 439 | forty four.eight | 4000 | 3000 | ≤30 | 15000 |
80 | one hundred thirty five.7 | 13.eight | 350 | 35.6 | 192 | 19.six | 653 | 66.6 | |||||
a hundred | 157.six | 16.one | 383 | 39.1 | 248 | twenty five.3 | 744 | 75.nine | |||||
forty | one hundred | 308 | 37.2 | 660 | 67 | 432 | forty four | 1232 | 126.seven | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at commence stop | The allowable optimum of the average load torque | Maximum torque is allowed in an instant | Enable the highest speed to be entered | Regular enter pace is allowed | Back gap | style existence | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | .7 | 23 | 2.3 | nine | .nine | 46 | 4.seven | 14000 | 8500 | ≤20 | 15000 |
eighty | 10 | 1 | thirty | three.1 | fourteen | one.four | sixty one | 6.2 | |||||
100 | 10 | 1 | 36 | 3.seven | fourteen | 1.four | 70 | seven.2 | |||||
17 | fifty | 21 | 2.1 | forty four | four.five | 34 | three.four | 91 | nine | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | fifty six | 5.7 | 35 | three.six | 113 | twelve | |||||
one hundred | 31 | 3.2 | 70 | 7.2 | fifty one | five.2 | 143 | fifteen | |||||
20 | fifty | 33 | 3.three | seventy three | 7.4 | 44 | four.5 | 127 | thirteen | 10000 | 6500 | ≤20 | 20000 |
eighty | forty four | 4.five | ninety six | 9.8 | 61 | six.two | 165 | 17 | |||||
a hundred | fifty two | 5.3 | 107 | ten.9 | 64 | 6.five | 191 | twenty | |||||
one hundred twenty | fifty two | 5.three | 113 | 11.five | sixty four | 6.5 | 191 | 20 | |||||
a hundred and sixty | fifty two | five.three | one hundred twenty | 12.two | 64 | 6.five | 191 | 20 | |||||
25 | 50 | fifty one | 5.2 | 127 | thirteen | 72 | 7.three | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
eighty | eighty two | 8.4 | 178 | eighteen | 113 | twelve | 332 | 34 | |||||
a hundred | 87 | 8.nine | 204 | 21 | a hundred and forty | fourteen | 369 | 38 | |||||
a hundred and twenty | 87 | eight.9 | 217 | 22 | a hundred and forty | fourteen | 395 | forty | |||||
32 | 50 | ninety nine | ten | 281 | 29 | one hundred forty | 14 | 497 | fifty one | 7000 | 4800 | ≤20 | 20000 |
eighty | 153 | 16 | 395 | forty | 217 | 22 | 738 | 75 | |||||
one hundred | 178 | eighteen | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | seventy five | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibition:
Software scenario:
FQA:
Q: What ought to I supply when I choose gearbox/pace reducer?
A: The very best way is to supply the motor drawing with parameter. Our engineer will examine and advise the most ideal gearbox model for your refer.
Or you can also supply below specification as properly:
one) Sort, product and torque.
two) Ratio or output pace
3) Operating situation and connection approach
4) Quality and mounted device title
5) Enter manner and input pace
six) Motor model product or flange and motor shaft dimensions
US $349.2 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
US $349.2 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | <span style="font-si |